Original Mark I upgrading to SN95

[R. Button]

If I upgrade to the SN95 spindles - converting from the old 1990 spindles do I need to also replace my Spindle Adapter Bracket? I have the original one from my build back in 1998.

[Jeff Kleiner]

Yes you do Ralph. I have a new set; PM me your address and they're yours!

Jeff

[Todd Baumann]

You do only if the ones you have, only have the two bolt holes, if they have the four holes then no.
I would bet most likely that yours is like mine, and they are the early style that only have the one set of holes.
Todd

[Mike N]

Ralph you should consider adding the Whitby (David Borden) SAI brackets if you do the SN95 swap to improve your king pin angle. If you do you will not need the 4 hole FFR adapters.

[Ophitoxaemia]

I highly recommend the SAI mod, even for street driving. Makes the steering less exaggerated around center, more linear through the range, and the car far less darty on the freeway with low profile tires and an autocross alignment. (wasn't a problem with the original 15" wheels)

[R. Button]

Jeff, thanks for the offer!! My biggest issue will be to get new 17" wheels!! James got me thinking that when I make the switch over might as well do it once with the SAI mod.