33 Coyote+Auto trans

[frydaddy]

Has anyone used the coyote with an automatic? I want to use an auto but want a direct bolt in, no alterations. any help would be appreciated.

[33WANNABE]

I am using the Coyote engine with the 4R70W transmission. It fit right in, but did need different motor mounts which you can get from Factory Five. It was not all that difficult and Ford Racing makes it very easy with their wiring harness. It is a great option for the car. If you have any specific questions I may be able to help.

[frydaddy]

Thank You. What do you get for the coyote kit from ffr? its 600.

[33WANNABE]

I didn't get the Coyote kit from FFR. I got the Coyote engine 2 years ago from Ford Racing when it first came out, and FFR did not offer the kit. FFR would be the best one to check with in terms of what comes with the kit.

[frydaddy]

Here is what comes in that kit.

33806 HOT ROD COYOTE INSTALLATION PARTS
33871 HOT ROD COYOTE ENGINE INSTALLATION INSTRUCTIONS
33835 M22 SPIN-ON-ADAPTER
33897 HOT ROD COYOTE ACCELERATOR PEDAL INSTALL KIT
33898 LONG ADAPTER BRACKET
33899 SHORT ADAPTER BRACKET
25862 1/4"-20 X 1.5" BOLT
10802 1/4" NYLON LOCK NUT
11088 1/4" WASHER
25460 FLANGE BUTTON HEAD SCREW, 1/4"-20 X 3/4"
10992 OIL FILTER RELOCATING KIT
12118 OIL HOSE, CUT 5' LENGTH
12119 OIL FILTER RELOCATOR
12132 THREADED NIPPLE
12121 BRASS FITTING, BARBED
15250 #14x 0.75" SCREW
12120 SPIN-ON-ADAPTER
12133 O-RING
12134 THREADED HOLE PLUG
11206 HOSE CLAMP
33837 COYOTE FITMENT KIT
33838 3/4" BYPASS CAP
33839 3/8" BYPASS CAP
33840 1/4" BYPASS CAP
10855 HOSE CLAMP, 1/4" FUEL LINE
15441 7/32"- 5/8" HOSE CLAMP
33846 1/4" NPT THREAD TO 5/32" BARB
33847 1/4" NPT THREAD TO 1/2" BARB
33848 ELBOW PIPE FITTING
33849 VACUUM HOSE
33845 3/8" FUEL LINE CONNECTOR
33850 3/8" ID x 3.50' HIGH PRESSURE FLEXIBLE FUEL LINE
12739 HOSE CLAMP, 3/8" FUEL LINE
11005 5/16" WASHER
33842 10 ga 5/16" STUD RING CONNECTOR
33843 RED POWER DISTRIBUTION BLOCK
33925 #8x 5/8" SCREW
33844 INSULATED WIRE, RED, 10 GAUGE
11202 1/2" HEATER HOSE
33760 9/16"-1.0625" HOSE CLAMP
11204 "T" HOSE FITTING
33851 "T" PIPE FITTING
33852 1/4" TO 1/8" NPT ADAPTER
33853 1/4" NPT TUBE
33924 3/4" TO 1/2" NPT ADAPTER
33896 HOT ROD COYOTE STEERING PARTS
10577 PILLOW BLOCK, 3/4" ID
33591 HOT ROD STEERING JOINT
11088 1/4" WASHER
33880 1/4"- 20 x 0.75" BOLT
33882 1" TUBE COLLAR
33820 HOT ROD COMPUTER MOUNTING KIT
33821 COMPUTER MOUNT BRACKET`
12339 M6 LOCKNUT
25460 FLANGE BUTTON HEAD SCREW, 1/4"-20 X 3/4"
10802 1/4" NYLON LOCK NUT
33830 HOT ROD COYOTE ALTERNATOR DRIVE KIT
33831 TENSIONER
33832 PULLEY WHEEL
33824 ALTERNATOR MOUNT BRACKET
11126 0.110" WIRING CONNECTORS
33829 SIX RIB SERPENTINE BELT
33860 ALTERNATOR FASTENERS
33833 M10 x 65MM BOLT
33834 M10 x 110MM BOLT
25376 10MM LOCKNUT
33822 M8 x 140MM BOLT
33823 M8 x 80MM BOLT
33841 ALTERNATOR SPACER SET
33825 3.39" SPACER
33826 3.48" SPACER
33827 1.00" SPACER
33828 1.176" SPACER

Thank You

Dan Golub
Technical Support
Factory Five Racing, Inc.