How to run wire harness from 4.6L

[bil1024]

Using the donor harness, there is no plug to seperate this long harness. So how do I run it to the rear ?

[rick8928]

Using the donor harness, there is no plug to seperate this long harness. So how do I run it to the rear ?

Had my 4.6 donor harness WireDieted. Then rear part of harness came down under the dash and through the gap at the top rear of the driver footbox inner panel, where it butts up against the upper front corner of the tunnel. From there, the harness dropped into the engine bay against the firewall and then through the tunnel, clamped to the upper left tunnel square steel tubing. At the rear, it swung up along the driver's side above the fuel tank before making a 90 degree turn at the rear frame tubes and then running across to the passenger side.

[MK4]

Ran mine from the l/h side of thé engine bay, down the front "X" and up to thé r/h side then in thé fire wall to m'y computer i'm thé passenger side foot box.then down dead center in thé transmission tunnel to thé back.

Cheers

You might see some of it hère

http://s1209.photobucket.com/albums/cc388/jfb280773/wiring/