golddog26
08-22-2012, 04:03 PM
I took delivery in February, Worked on it for a month straight and finished all panels, front end, rear end, wheels and tires on, rolling chassis. Steering system complete and operational. Brakes need hard lines bent and installation, but included along with stainless lines too. Wire Harness to front and rear installed. Dash Harness in as well. Ready for motor and trans drop. Car has been sitting since March and untouched. No time and now considering a family move. I guess it was not the time.
I was building as a weekend driver with possible car show attendance. I wanted a reliable driver so was going to go with EFI. I have return lines as well as supply lines. Fuel tank not in yet as I wanted to route brake lines and fuel lines at the same time.
Any questions, please PM or call me direct on my cell. I am in the Central Valley, CA. Asking 24,000.
Thanks,
Jeff 209.968.5356
PM For Pics, but here is what is for sale:
MKIV Chassis #7664, Delivered Feb 2012. Complete Kit.
Powder coated Chassis
Non-Donor
3 link rear suspension
Body on buck with cutouts traced
Forte 8.8 with 3.83 gears
Performance 11.65 rear Disc brakes
Competition backed Aluminum Seats from FFR
351 Headers 4 into 4 from FFR
Polished exhaust
Brake duct mesh
Stainless bumpers front and rear
Windshield Wiper kit
Wind wings
Sun Visors
Electric Ultra Lite Gauges
Passenger and Driver Chrome Roll Bars
Halibrand wheels. 10.5 wide rear. DOT Street Legal Tires mounted. Chassis in Roller stage
31 Spline Driveshaft (for small block Ford motor with TKO Transmission)
Extras:
Powder coating of all aluminum panels
Breeze Kool Mat sound deadening kit
Tangent Technologies Blind Roll Bar Attachment Kit
Wilwood Balance Bar Cable Adjuster
Breeze Quick Disconnect Tail and Head light kit
Breeze Engine compartment battery mounting kit
Breeze Radiator Shroud and kit
Breeze Lower Radiator mounting kit
Breeze EFI Kit.
Adjustable thermostatic switch
Russ Thompson Gas Pedal
Russ Thompson matching brake and clutch pedal
Russ Thompson Dead Pedal
Mom Steering Wheel
Breeze 3 link Chassis Brace (Not installed)
Casey Designs Custom Dash
Extra Tach and Speedo (Larger than supplied from FFR)
Heat Barrier adhesive for firewall
190 LPH In Tank EFI Fuel pump and bracket
Ultra Lite fuel pressure gauge for dash
I was building as a weekend driver with possible car show attendance. I wanted a reliable driver so was going to go with EFI. I have return lines as well as supply lines. Fuel tank not in yet as I wanted to route brake lines and fuel lines at the same time.
Any questions, please PM or call me direct on my cell. I am in the Central Valley, CA. Asking 24,000.
Thanks,
Jeff 209.968.5356
PM For Pics, but here is what is for sale:
MKIV Chassis #7664, Delivered Feb 2012. Complete Kit.
Powder coated Chassis
Non-Donor
3 link rear suspension
Body on buck with cutouts traced
Forte 8.8 with 3.83 gears
Performance 11.65 rear Disc brakes
Competition backed Aluminum Seats from FFR
351 Headers 4 into 4 from FFR
Polished exhaust
Brake duct mesh
Stainless bumpers front and rear
Windshield Wiper kit
Wind wings
Sun Visors
Electric Ultra Lite Gauges
Passenger and Driver Chrome Roll Bars
Halibrand wheels. 10.5 wide rear. DOT Street Legal Tires mounted. Chassis in Roller stage
31 Spline Driveshaft (for small block Ford motor with TKO Transmission)
Extras:
Powder coating of all aluminum panels
Breeze Kool Mat sound deadening kit
Tangent Technologies Blind Roll Bar Attachment Kit
Wilwood Balance Bar Cable Adjuster
Breeze Quick Disconnect Tail and Head light kit
Breeze Engine compartment battery mounting kit
Breeze Radiator Shroud and kit
Breeze Lower Radiator mounting kit
Breeze EFI Kit.
Adjustable thermostatic switch
Russ Thompson Gas Pedal
Russ Thompson matching brake and clutch pedal
Russ Thompson Dead Pedal
Mom Steering Wheel
Breeze 3 link Chassis Brace (Not installed)
Casey Designs Custom Dash
Extra Tach and Speedo (Larger than supplied from FFR)
Heat Barrier adhesive for firewall
190 LPH In Tank EFI Fuel pump and bracket
Ultra Lite fuel pressure gauge for dash