5x114.3 would be nice

[Gus]

Good day all,

I have a chance to buy a set of 4 OZ Ultraleggera 17X18 5x114.3 for 500$!!! I know WRX bolt pattern is 5X100, but how hard and how much would a conversion cost. I know there are other threads on this subject over a NASIOC but I figured since we are building the car there might be other factors involved (simplifying the task maybe). Here's a few pictures

111881119011189

Cheers

[PhyrraM]

Hub adapters is one way.

The other would be to use STI hubs/knuckles and round-file FFRs provided CV axles and upper control arm adapters to make your own that fit the STI parts.

IMHO, buy the $500 wheels if they are a good deal then resell/trade them for a nice 5x100 set.

[metalmaker12]

2nd that

[LS1RX7owen]

agreed, if they are such a good deal then buy them and resell them with good pics and detail for a profit.
then keep on doing that, until you can afford some 17x8.5 CE28N's in 5x100
:)

[mug23]

That would nice too. This way, I could use if not all but most of my 05 STI parts.