Dan Babb
08-04-2012, 08:03 PM
I finished my MassFlo EFI conversion, so I have these parts for sale.
ECM & MAF Meter - $350 plus shipping
ECM is a 1993 Cobra computer. X3Z is the code. This is programmed for 24lb injectors stock from Ford.
http://i26.photobucket.com/albums/c105/DanBabb/ForSale/ECM2.jpg
Pro-M MAF Meter calibrated for the computer (24lb injectors). I had this recalibrated a couple months ago by ProM and have the flow sheet. I have the MAF bracket too.
Tiny Avenger Intake Tube ( the tube and MAF have a polished looking finish)
Because the Meter is programmed for the Cobra computer, I think it's best to sell them together.
http://i26.photobucket.com/albums/c105/DanBabb/ForSale/MAF2.jpg
http://i26.photobucket.com/albums/c105/DanBabb/ForSale/MAF3.jpg
Flow Sheet
http://i26.photobucket.com/albums/c105/DanBabb/FFR5857-Cobra/ProM-MAFspecs.jpg
*****Intake Setup is SOLD********
Intake Setup - $200 plus shipping
Includes:
Edelbrock EFI upper & lower intake
BBK Throttle Body
These are known to whistle. I did file down the idle hole a bit and it doesn't whistle, but you can still hear a rush of air when you come off throttle.
Adjustable Fuel Pressure Regulator
What you see is what you get. I don't have the injectors and sensors available (I used them on my car).
http://i26.photobucket.com/albums/c105/DanBabb/ForSale/Intake2.jpg
http://i26.photobucket.com/albums/c105/DanBabb/ForSale/Intake1.jpg
Prices - I looked online and think I've priced these fairly, but money talks, so make me an offer.
Shipping quotes - I'll drop this off at the UPS Store. You can get an estimated cost on the UPS website. It will ship from zip code 27358.
Payment - would prefer paypal (pretty easy for us all), but money orders would be OK too.
Disclaimer - All parts are used, but everything works as it should.
Contact:
PM me here.
If you have any questions, include your phone number and I'll call you back.
ECM & MAF Meter - $350 plus shipping
ECM is a 1993 Cobra computer. X3Z is the code. This is programmed for 24lb injectors stock from Ford.
http://i26.photobucket.com/albums/c105/DanBabb/ForSale/ECM2.jpg
Pro-M MAF Meter calibrated for the computer (24lb injectors). I had this recalibrated a couple months ago by ProM and have the flow sheet. I have the MAF bracket too.
Tiny Avenger Intake Tube ( the tube and MAF have a polished looking finish)
Because the Meter is programmed for the Cobra computer, I think it's best to sell them together.
http://i26.photobucket.com/albums/c105/DanBabb/ForSale/MAF2.jpg
http://i26.photobucket.com/albums/c105/DanBabb/ForSale/MAF3.jpg
Flow Sheet
http://i26.photobucket.com/albums/c105/DanBabb/FFR5857-Cobra/ProM-MAFspecs.jpg
*****Intake Setup is SOLD********
Intake Setup - $200 plus shipping
Includes:
Edelbrock EFI upper & lower intake
BBK Throttle Body
These are known to whistle. I did file down the idle hole a bit and it doesn't whistle, but you can still hear a rush of air when you come off throttle.
Adjustable Fuel Pressure Regulator
What you see is what you get. I don't have the injectors and sensors available (I used them on my car).
http://i26.photobucket.com/albums/c105/DanBabb/ForSale/Intake2.jpg
http://i26.photobucket.com/albums/c105/DanBabb/ForSale/Intake1.jpg
Prices - I looked online and think I've priced these fairly, but money talks, so make me an offer.
Shipping quotes - I'll drop this off at the UPS Store. You can get an estimated cost on the UPS website. It will ship from zip code 27358.
Payment - would prefer paypal (pretty easy for us all), but money orders would be OK too.
Disclaimer - All parts are used, but everything works as it should.
Contact:
PM me here.
If you have any questions, include your phone number and I'll call you back.