View Full Version : 818 in canada
Leturnracing
07-29-2012, 06:56 AM
Hello, did someone knows if the projet 818 will be release in canada at the same time as the usa? Thanks
NicksPapaw
07-29-2012, 07:44 AM
Don't know the answer to that one, but, the 818 is being designed for both right and left hand drive so it can be exported around the world. Heck, that means it might even get to Canada one day. :) Maybe one of the Factory Five employees will see this post and respond. By the way, Welcome to the Forum!
Leturnracing
07-29-2012, 06:25 PM
Thanks
riptide motorsport
07-29-2012, 08:56 PM
judging by the experience FFR has with exporting the other car lines they produce into the great white north, I would say that they would be able and ready to do it at the first release...................Steven
Xusia
07-30-2012, 12:46 AM
I thought I read somewhere that it wouldn't be available in Canada right away. Some BS export stuff. Anyway, I wouldn't put any stock in that until you hear from FFR.
TonyS
08-03-2012, 02:41 PM
After reading the page on importing FFR kits to Canada, I would assume that they will also work with Transport Canada to get this model approved for Canadian Import, although it might take some time to shuffle the papers.
The question I have is, once allowed to import one to Canada, can I also register and insure it for legal road use? How much hassle would that be? Being able to import it is not the same as being able to register it to drive on the road. If I only planned to use it for track / auto-X or show events, this would not be an issue as I have access to a car trailer, however I want to be able to legally drive it to the store and around town too.
305mouse
08-03-2012, 03:59 PM
That is something you are going to have to check with your motor vehicle department for whatever Province you reside in. I don't know if Provinces laws vary from one to the other but something to look into. Here in the States depending on where you are it ranges from very easy to very hard to register a kit car.
Hi TonyS, I live in Canada as well (Kingston, Ontario to be precise). I'm planning on importing a 818 whenever it becomes avail to us Canadian. For the 33 Hot Rod launch there was a 6 months delay to get the kit approved by Transport Can, you could expect similar delay with the 818. As 305mouse mention every province is different, I have good info about the registration process in Ontario and Qc. I'm assuming it won't apply to you but I can still post the link if you are interested.
Leturnracing
08-04-2012, 06:22 AM
I m interested about the post for the registration in quebec . thanks
Leturnracing as requested http://www.saaq.gouv.qc.ca/documents/documents_pdf/dossiers_speciaux/veh_modif_artisan.php. Tremblant (en particulier la piste) est assurément un des meilleurs spot pour profiter à 100% des capacités mises de l'avant par la 818, chanceux!
Leturnracing
08-05-2012, 07:46 AM
Merci pour l info , j aimerais bien essayer la piste un jour!!
Oppenheimer
08-06-2012, 11:32 AM
I've been to Tremblant a number of times, really enjoyed it. Hope to get back there this ski season. Yes, it would be a great place to drive an 818 (in the warmer season)!