Dual roll bars on a Mark IV

[cobranut]

Has anyone installed dual roll bars on a Mark IV yet and do you have pictures? Can we still get from FFR the 2" roll bars?

[Jeff Kleiner]

Mk4 with 1 1/2" bars:

http://i269.photobucket.com/albums/jj43/jkleiner/Untitled-2.jpg

When the Mk4 was introduced FFR still offered the 2" bars. The mounts have since been revised and I am not sure if that is an option any longer. If Brian or one of the guys doesn't chime in on this give 'em a call.

Cheers,
Jeff

[cobranut]

I appreciate the picture Jeff. I'm possibly selling my Mark III and will be building another. I prefer the larger roll bar. I will call FFR and see if they still make them. Thanks, Perry

[Brian Z]

The roll bar mounts on the MK4 have changed. If you have fit an MK3 rollbar on your car and it worked fine you can also use an MK2 or MK1 rollbar. The later model MK4 roll bar mounts have changed and the larger diameter rollbars will not fit on the frame.

Best regards,

[jimgood]

Their parts catalog only shows 2": https://factoryfiveparts.com/product.php?productid=16255&cat=255&page=1

[Brian Z]

We carry the Mk4 roll bars, they are just not on the website yet. You can call Factory Five Racing to place an order. They have different part numbers. The cost is the same.

Kind regards,