Drive shaft fitment with TKO600 - Coyote combo

[Jester]

I have installed the coyote and TKO600.

Question - with the drive shaft installed and connected to the dif, does the drive shaft stub end fit completely into the transmission opening?. On my install the drive shaft stub does not completely go all the way into the transmission opening (approx 1.5 inches of the stub remaining that does not go into the transmission). Is this correct or is the drive shaft too short?

Thx for the help

[Brian Z]

That sounds like it is perfect. You don't want the slip yoke to be in the transmission too far as it will damage the seal inside the trans. It also allows for some movement in and out as your suspension travels up and down.

Best regards,

[Jester]

Great thanks for the quick reply Brian

Cheers!