Coyote - Low profile Champ Pan & oil pressure sending unit

[Jester]

Good Afternoon

Question: The low profile Champ Oil Pan for the Coyote engine has 2 plugs along with a drain plug. One of these plugs is for the stock oil level indicator as per the stock oil pan however can the extra plug (located just infront of the oil level plug) be used for the oil pressure sending unit vs the location behind the alternator as per the draft Coyote install instructions from FFR.

Thanks for the help

[oldguy668]

No, the pan isn't pressurized. I tee'd the gauge sender with the stock sender behind the alternator but some have replaced the stock sender. I was not sure at the time if the ECU was taking data from the stock unit.

[Jester]

Ok Great thanks for the help!