New Tillet B6 seats in my GTM

[eseethal]

I have now installed the Tillet B6 seats, here are some pictures of the seats in the car. They do look really great I think and now my harness seat belts are mounted as they should be. These seats are really small (and very lightweight), so there is enough room in the GTM for these seats. They are actually quite comfortable, once you are sitting - getting in and out is quite a challenge :-)
The driver seat is on adjustable sliders and even with the sliders there is plenty of headroom. The B6 are floor mounted, so the installation was quite easy.
If there are any questions, just let me know.

Eugen

[fact5racer]

How much are they? Still trying to fit in mine with a helmet.

[Fraser D]

The only Tillett US and Canadian distributors show only cart seats on their websites.
Tillett themselves sell the B6 for just under GBP500 for FG and around GBP600 for CF plus shipping, plus padded inserts, etc, etc.
https://www.tillett.co.uk/shop/shopDisplayCategories.asp?id=9&cat=Car+Racing+Seats

[kabacj]

Eugen

Those seats look great. Seems like they are narrow enough to fit perfectly. Did you bolt them to the floor the same way that the FFR seats mount, or do they sit on a frame?

Thanks
John

[eseethal]

John,
yes, the passenger seat bolts right to the floor, with 1 3/4 inch spacers. For the drivers seat I reworked the sliders I had on my stock seat. The witdh of the bolt holes is the same with both seats, the length between the bolt holes is about 1/2 inch longer with the Tillet seats.

Eugen


Eugen

Those seats look great. Seems like they are narrow enough to fit perfectly. Did you bolt them to the floor the same way that the FFR seats mount, or do they sit on a frame?

Thanks
John