Tapping into the TPS?

[mhoward1]

So the new Analog/Digitial data recorder is in the car. Any suggestion on tapping into the TPS? Any other OEM sensors I can take advantage of?

I have 8 analog and 4 digital channels I can use.


Thanks

[FFSpecRacer]

I pull MAF, ECT, ACT, and TPS from the computer.

However, I learned in my case (G2X) that I MUST have the G2X on anytime the car is running. Get some weird issues when it's not and it has to be related to pirating the sensor signals.

[mhoward1]

Pulling from the computer and not the sensor itself?

[FFSpecRacer]

reference wire to computer.

[Bob Cowan]

Using a Haltech, not a Ford computer. I simply tapped off the signal wire and fed it to data logger. Not a problem.

[mhoward1]

Thanks,
This is usefull

http://www.veryuseful.com/mustang/tech/engine/images/88-91_5.0_EEC_Wiring_Diagram.gif


Now I need to build a lookup table for each one.