View Full Version : upgrade winter rebuild RTTavi racing 09
R.T. Tavi
03-11-2012, 12:22 PM
got my heads and started puttting the engine back together. working on the chassis too.82588259
also have a question about the front brake lines - is there a fitting that screws straight into the caliper and goes to a -4? (that replaces the banjo fitting)
johngeorge
03-11-2012, 08:37 PM
The thread size is 10mm x 1.0 for the caliper banjo.. I'm sure they sell an AN fitting for that.
mhoward1
03-12-2012, 04:07 PM
It's looking good, but where is the outside head/shoulder protection diagonal bar?
FFRSpec72
03-13-2012, 10:56 AM
I used a # 4 hose with a 90 degree from F-Panel and then a female fitting at other end which attached to banjo fitting.
R.T. Tavi
03-16-2012, 09:27 PM
The roll cage mods were approved in advance by NASA, Factory Five and SCCA. If you look at Scott McKay's car, he doesn't have them either.
BTW, I found an Earl's fitting for the calipers (592042ERL).
mhoward1
03-17-2012, 07:16 AM
I do like the Front supports and halo section. I think that's a great solutions.
Glad you also found a fitting. Any events planned yet?
R.T. Tavi
03-17-2012, 12:46 PM
Looks like June Grattan, Gingerman Then maybe Atlanta if things go well and gas prices