MK4 sidepipe hanger question

[FDLWproject]

I am at the point of attaching my Gas N sidepipes to my MK4 (kit delivered in July 2023). Planning to use the kit supplied hanger and hardware.

Maybe I'm dense, but did they change the hanger and hardware? Pictures below show what I have vs what's in my manual (and the subsequent pages differ from what I have in hand too).

The main differences:
1. It looks like the round rubber bushing goes through one end of the hanger instead of being bolted to the side of the hanger.
2. The other end of the hanger has a pivoting piece now that can articulate instead of remaining fixed. Assuming they did this so you can fine tune the drop in the pipes?

Anyways - think I could figure it out, but not sure if anyone has the manual pages for this just to be sure. Anyone have updated instructions or ideas?

Thanks
227556
227557
227558
227559

[cv2065]

In the picture you show the brackets that come from Gas-N for their sidepipes. Are you trying to align those with the FFR manual?

[FDLWproject]

Well, that makes a lot of sense. It’s been a while since I unpacked everything and forgot that Gas N sent their own hangers. Problem solved. Thanks!