Headlight Switch

[JohnnyDeere]

Afternoon Gents,

I have been on the struggle bus with the dash wiring but as I positively find the correct connections my wire count is dropping which is making life easier. I am looking at the Headlight switch, and I think I confirmed it with the light switch wiring diagram on the FF website that the headlight switch does the hi/low beam by pulling out the switch all the way? I do not need to connect an additional switch for this function correct? My light switch is chrome and does not look like most of them on the forum, so I was not sure if the switch is an update. Also, what is the turning function of this switch, it looks like it engages something when twisted.

Thanks Guys

[michael everson]

If its a GM style switch it needs a separate switch for high beams. Twisting it dims the dash lights and eventually turns on interior lights.
Mike

[Papa]

In addition to what the other responses provided, pulling the switch out to the first detention will activate the parking lights, and pulling out to the second detention will turn on the headlights. There is a small button on the side of the switch that you press to remove the rod from the switch.


https://youtu.be/Tlzdq2nVCcE?si=aMDblfLqLQ7gOKtH