Sold

[ericha]

Sold

[Jeff Kleiner]

Methinks you will find exactly zero interest in SPF parts on a site dedicated to FFRs. :rolleyes:

Jeff

[Jim1855]

I agree with Jeff and will add that the factory bars were often replaced to upgrade as were coilovers and rear upper shock mounts. All SPF cars came with those or similar bars.
Jim
Former owner of SPF 1855 & 2584

[J R Jones]

ericha,
I feel you may do better with a SPF forum but there is a chance for a creative person here to use your parts, the price is right. It looks like you have front and rear bars available.
I have a modified 818 chassis that had the awful Subaru rear anti roll bar on the front. I made an Acura bar fit.
Because your parts are unknown here, you should list the dimensions.
Bar diameters.
Bar lever arm lengths.
Link boss widths, (end to end)
It looks like the pivot bushings can be positioned anywhere inside the bends, list the maximun pivot bushing widths.
Good luck,
jim

[ericha]

ericha,
I feel you may do better with a SPF forum but there is a chance for a creative person here to use your parts, the price is right. It looks like you have front and rear bars available.
I have a modified 818 chassis that had the awful Subaru rear anti roll bar on the front. I made an Acura bar fit.
Because your parts are unknown here, you should list the dimensions.
Bar diameters.
Bar lever arm lengths.
Link boss widths, (end to end)
It looks like the pivot bushings can be positioned anywhere inside the bends, list the maximun pivot bushing widths.
Good luck,
jim

Thanks Jim. I was told at a SPF forum that I should post them here! It's not really about the money, I just would hate to toss them on the scrap truck.

That's a good idea and I will get those dimensions directly.

[ericha]

The front bar is 20mm and the holes measure 34 7/8" center to center. The rear bar is 24mm and the holes measure 38 1/4" c to c.

[ericha]

PRICE REDUCED. $100 shipped