Coyote control pack wiring inconsistency?

[stuchman1]

Hello friends,

We're working on installation of our gen 3 Coyote in our MK4, but I'm puzzling through the harness. We purchased the M-6017-M50B control pack as directed. The FF manual mentions cutting back the intercooler wires, which in the accompanying picture are labeled C400 2-way ICP. I don't have ICP wires. That led me to check the rest of the harness and it's indeed a M-6017-M50B per the box, but I've noticed some other discrepancies compared to the manual Ford puts out for this harness. I'm hoping someone can tell me what this means. When I mention that I have or don't have, that's in contrast to what the Ford manual says the harness should have.

I don't have an "optional EPAS connection," which the Ford manual looks like I should.

I have the following, which aren't mentioned in the Ford manual:
- C129 IAT, by the wire for MAF and alternator
- C1743 CACCT, next to the one above
- C1217 CPC, again next to the one above
- "C8 PATS module" by the wire for "CPP-BT"
- and again, I'm missing ICP / intercooler wires

Any thoughts? Also no, I'm not installing a supercharger.

Thanks!
Sascha

[michael everson]

Only use the MAF and alternator in the section of the harness. Ford updated the harness to work with more engines, but the part number stayed the same
Mike

[stuchman1]

Great. Thanks!