EBrake aluminum cover for the emegency brake

[Ronc116]

Does anyone have a good picture of the aluminum to cover the hole by the emergency brake handle before carpet instalation

[phileas_fogg]

It's not the best, but you can see what I did below. Basically, I just covered as much of the lower aft part of the opening that I could with some scrap, using plain old rivets to attach the panel. This first picture is the opening as first delivered, and the second shows the patch.


John

226382226383

[Ronc116]

It's not the best, but you can see what I did below. Basically, I just covered as much of the lower aft part of the opening that I could with some scrap, using plain old rivets to attach the panel. This first picture is the opening as first delivered, and the second shows the patch.


John

226382226383

Thank you