Vintage wheel pin drive adapter

[Gregmills]

Trying to put Wilwood brake kit(140-11018) on front . The rotor will fit spindle,that’s all good . Can’t tell if the pin drive adapter will fit over the rotor. Talked to Wilwood not much help . They said all dimensions are on website ,not enough detail to figure it out. Fox body spindle 15 in. Vintage wheels pin drive adapter. Any help or suggestions would be appreciated.

[Stangrob]

It could be worth talking to Bob at Vintage Wheels - he might have some experience with the combo you're trying to put together. Their tech support number is (619) 952-4717.

Rob

[Mike.Bray]

I have Wilwood 140-9107-DR front brakes and Vintage Wheels pin drive adapters. Bolted right up, no issues.

I do see your Wilwood kit comes with the hub whereas I used the Mustang type hub. https://www.summitracing.com/parts/mog-513115

224526

[rich grsc]

I don't think you can use 15" rims with that Wilwood brake??
Mike how did you fit 15" rims over them?

[Greg K]

Some have had to machine the Wilwood cap for the adapter to fit.

[Mike.Bray]

I don't think you can use 15" rims with that Wilwood brake??
Mike how did you fit 15" rims over them?

Easy, I have 17" wheels:)

[rich grsc]

Thats what I thought, he was saying 15" wheels