clutch master cylinder

[Falcondriver]

I believe my Factory Five supplied Wilwood master cylinder for my hydraulic throw out bearing is defective. Part number Z-260-14297 made exclusive for Factory Five. I understand there is another manufacturer of master cylinders that may be better. Does anyone have the part number for this manufactures replacement? Are there other modifications that need to be made to accomadate the change? I beleive the company is Tifdon or Tildon.

[rickshank]

Tilton Series 75 if you want barbed fitting for reservoir, Series 76 if you want AN fittings.

Pegasus Auto Racing sells them SKU 37991 if you want 13/16" bore. They have other sizes.

The front mount is the same, but check the hydraulic fitting size.

[Mike.Bray]

I believe my Factory Five supplied Wilwood master cylinder for my hydraulic throw out bearing is defective. Part number Z-260-14297 made exclusive for Factory Five. I understand there is another manufacturer of master cylinders that may be better. Does anyone have the part number for this manufactures replacement? Are there other modifications that need to be made to accomadate the change? I beleive the company is Tifdon or Tildon.

You're not the first, quite a few reported failures of the Wilwoon master cylinders. You can get the Tilton master cylinders at Summit, you want the 13/16" bore for the clutch.

I used the 76 series, P/N TIL-76-812 https://www.summitracing.com/parts/til-76-812

If you want the 75 series https://www.summitracing.com/parts/til-75-812u