Fuel Sensor MK5

[EricSATX]

Are the fuel senders' resistance ranges needed for the Vintage GPS gauges (16007X) 240–33 Ω, or 0-90Ω? I am asking because I am considering installing a Boyd EFI tank.

[Jeff Kleiner]

Are the fuel senders' resistance ranges needed for the Vintage GPS gauges (16007X) 240–33 Ω, or 0-90Ω? I am asking because I am considering installing a Boyd EFI tank.

There are several preset ranges and the gauge can also be manually programmed.

https://speedhut.com/content/instructions/2in_and_258in_rev_fuel_level_instructions.pdf

Jeff

[EricSATX]

There are several preset ranges and the gauge can also be manually programmed.

https://speedhut.com/content/instructions/2in_and_258in_rev_fuel_level_instructions.pdf

Jeff

This is helpful! Thanks

[EricSATX]

One more related question related to the Boyd tank... Is the 350 LPH pump supplied with the ready-to-install Gen 4 Coyote/transmission package intended to be installed into the Boyd/FFR aluminum tank directly, or is it a standalone pump requiring a separate hanger/module?