Inventory switch question

[2nd2none]

Finally getting around to finish my inventory and have questions on some items from Box 27. These 4 switches are the only things I'm not 100% sure on what they are. I'm assuming the big thing on the right that pulls out is the 17685 Headlight Switch. No buttons in the box so guess I'm just missing the 17571 horn button and the 17572 headlight high/low beam button. Would these switches be what's the inventory sheet calls out as the 17579 On-On Connector and 17578 On-Off Connector and I just got an extra of one of them?
223756
223757

[Oshkosh Rob]

The far right switch is the main headlight switch. The 3 toggle switches are what they are calling the On-On, the On-Off, and the headlight Hi/Low. Once you get to the wiring section, the toggle switches will make more sense. You may not even use some or all of them. I went with a self-cancelling directional unit and it had added switches incorpated to do the horn and hi/low beams. The only toggle switch I ended up with was for the emergency flashers.

[gbranham]

Those three switches could be used for things like hi/low beam, hazards and turn signal. As Rob mentioned, you might use all, some, or none of them, depending on what you want to do with your dash, custom switches, turn signals, etc. I used one of them for my turn signal.

Greg

[2nd2none]

Thanks guys. Guess I needed to specify I have a Mk5 kit. Just got off the phone with Nick at FFR. I guess the electrical components have been switched with the Mk5 kits and he said I should have actual pushbuttons for the high/low beam and horn. The Mk5 doesn't come with toggle switches now and the on-on, on-off connectors are pigtails that would connect to the backs of these pushbuttons