Gen II Hatch Latch....need one

[VRaptor SpeedWorks, LLC]

I have a Gen II kit I'm working that is missing several pieces....the hatch latch being one of them (as well as the support bracket that it connects to that extends down to the chassis). I've been searching around for something similar and coming up pretty empty. Anyone got a part number or know where to get a replacement or something similar that would work?

[ohmygosuness]

Is this for the hood or somewhere else? I might be able to dig one up.

[VRaptor SpeedWorks, LLC]

This is for the rear hatch on a Gen II. I wish I had a photo to share, but I can't seem to find one of just the latch. This was provided with the kit....not a donor part. Silver colored latch sort of similar to the door latches, but with a release arm set up for cable release.

[ohmygosuness]

I have these. Southco and Eberhard.
223750223751

[beeman]

Would a Gen 1 work? Might have one laying around

[VRaptor SpeedWorks, LLC]

I have these. Southco and Eberhard.
223750223751

Thank you!! I put that name into google and I've found a few online that appear identical but have thru holes instead of threaded holes....so just sent an email off to the manufacturer to see if they can hook me up with the ones with the threaded holes. Thanks again!

[ohmygosuness]

I looked them up on Google and couldn't find the exact ones. I wonder if similar ones would work with minor modifications.

[VRaptor SpeedWorks, LLC]

I just sent the pics you took to the company to see if they can let me know where to get the exact replacements.....hopefully with the hardware to attach the release cable like the ones FFR provided.....

[VRaptor SpeedWorks, LLC]

Yeah, if I can't find the exact ones, I'll probably just buy the same model with the thru holes and will have to run bolts all the way thru.