Attaching Radiator Aluminum Floor Piece to Breeze Lower Radiator Mount?

[Jim Doak]

For you guys who are using the Breeze lower radiator mount and FFR's lower radiator aluminum floor piece: How did you attach the aluminum panel to the radiator? Did you simply drill through the aluminum floor piece, then through the lower radiator mount flange then into the Breeze 1/2" square cross tube?

Thanks.

[BornWestUSA]

Mine is just riveted into the radiator and the side pieces, not the Breeze radiator mount or the body

222205

[rich grsc]

It is not attached to the Breeze mount

[steno]

To the radiator only with short 1/8" rivets.

[F500guy]

Per the breeze instructions, the radiator was supposed to be attached to the lower support using a loose screw in the center. I did that and then I made a oversize hole in the front aluminum plate that accounts for that button head bolt to poke thru. I then used some of the bolt clips (tinnerman I think they are called) on the radiator flange so I could screw the front aluminum with screws to radiator plate.

222208

[Rebostar]

I did the same as F500guy useing tinnerman nuts screwed to the lower radiator flange.

222221222222222223