FFR Leather Steering Wheel Question

[Doc76]

I plan to swap my wood wheel for the FFR leather one. I’m looking for a centre cap without a logo. Can anyone tell me where I can find one like this?

222039

[rthomas98]

The logo is not pre-installed on the wheel. If you don't want to add it you don't need to. Unless you are getting someone else's wheel. The logo is very easily removed with heat and acetone to remove the residue. Hope this helps.

[Doc76]

The logo is not pre-installed on the wheel. If you don't want to add it you don't need to. Unless you are getting someone else's wheel. The logo is very easily removed with heat and acetone to remove the residue. Hope this helps.
It does thanks
The FFR comes with this center cap then?
Website doesn’t indicate a cap is included.

[Papa]

It does thanks
The FFR comes with this center cap then?
Website doesn’t indicate a cap is included.

The part show in the picture is a kit part. The logo part fits in the recessed area of that part. I'm not sure if FFR still sells them, but I swapped the center out to this:

https://thefactoryfiveforum.com/attachment.php?attachmentid=153365&d=1631630398

[OSU Cowboy]

Papa - I like that steering wheel center cap. I've got that on my steering wheel also. I'm not a fan of "snakes" - and don't have one anywhere on my car.

[rich grsc]

Just remove the logo from the cap you have. It's just glued on

[Doc76]

Found it
Thanks for the feedback guys
It’s FFR pt#14657 sold separately from the wheel when purchasing post-build

[Mike.Bray]

I designed a new center piece and had it 3D printed, then polished it up. It would be easy to design a plain smooth one. If you need some help designing it PM me.

222067 222068 222069

[Doc76]

I designed a new center piece and had it 3D printed, then polished it up. It would be easy to design a plain smooth one. If you need some help designing it PM me.

222067 222068 222069

Very cool. Is that metal sintered or a “plastic”?

[Mike.Bray]

It's aluminum 3D printed.

[Doc76]

Well got it switched up to the FFR leather wheel. I must say I like the feel and look much more
To my surprise my 17 year old daughter said “dad I like to wood wheel more”, lol 222671222670

[Rebostar]

Doc
I swapped out the wood wheel with the leather wrapped one as well. I like it better, by a lot! Feels better, and is fatter in my large hands. I painted the spokes to match the rest of the interior painted parts. I found a Cobra logo center cap like the one in your pic at Tony Branda. It snapped right into the FFR center section an looks great. Never seen a completely blank one though I recall someone having one turned down at a machine shop.

222711

[Doc76]

Doc
I swapped out the wood wheel with the leather wrapped one as well. I like it better, by a lot! Feels better, and is fatter in my large hands. I painted the spokes to match the rest of the interior painted parts. I found a Cobra logo center cap like the one in your pic at Tony Branda. It snapped right into the FFR center section an looks great. Never seen a completely blank one though I recall someone having one turned down at a machine shop.

222711

Thanks
Yours looks really sharp. I first tried the center cap with just a foe carbon fiber PPF piece but it wasn't really the look I was happy with.

[Mike.Bray]

To my surprise my 17 year old daughter said “dad I like to wood wheel more”, lol

My wife has never warmed up to te wood wheel on our Cobra. Then the other night she mentions she would like a wood wheel for her Sunbeam. Women, I'll never figure them out.