View Full Version : LS neutral safety switch.
Blitzboy54
11-16-2025, 06:08 PM
Does the LS come with its own neutral safety switch like the Coyote or do you use the RF harness provided one like an SBF?
Thanks
My LS3 harness from PSI (GM ECU) has an orange park/neutral wire but it is not a safety switch wire and will not prevent the engine from starting. I'm guessing it's for use with an automatic. I tucked it away and did the same with the NSS plug on the TKX. I'm using a clutch safety switch with an override button under the dash so I can start the car without getting in it.
edwardb
11-17-2025, 07:41 AM
The crate LS3 with the GM LS series crate engine control system I installed in my 35 hot rod truck build did not have a start wire to the starter like a Coyote. So I used the blue start wire from the RF harness. The standard RF installation routes this wire through a safety switch on the clutch if you're doing a manual shift build. I did an automatic build with a Lokar shifter and the shifter had a neutral or park safety switch which I routed the RF blue wire through.
Blitzboy54
11-17-2025, 08:53 AM
Thank you gentlemen. That is exactly what I needed to know