Hydraulic Clutch Line Routing - MK5

[MakoGT350]

Working on an early design MK5 complete kit
Using the wilwood pedal assembly and master cylinders
Blueprint 347 / TKX with hydraulic clutch
Kit has the braided AN line

Looking for some insight on where to run the line.

[rponfick]

I ran mine straight towards the center of the car, under the steering shaft, and out through the alum panel into the rear of the engine compartment. Engine not in yet, so hope that works.
I have the same setup as you with BP 347, TKX.
Ralph

[Reddrig]

Ran it out the aluminum panel on the right side of foot box down to the tranny. No problems with it so far.