PDA

View Full Version : Steering Column Plug (male end) Replacement



GTM-Blease
11-05-2025, 08:23 PM
New to the forum, so let me know if this belongs somewhere else.

Working on getting some of the wiring wrapped up on a gen 1 GTM. Originally came with a donor pack, but a few parts were lost over time.

Has anyone had any luck finding the male end of the steering column plug? (or better yet, if someone has one I can buy off them)

Stopped by a few salvage yards in my area, but haven’t had any luck finding Corvettes. And, found a shop that has sold a few in the past, but they’re out of stock at this point: https://nextgenpartsplace.com/products/copy-of-97-04-c5-turn-signal-wiper-stalk-pigtail-oem?variant=41677093634254

221107

VRaptor SpeedWorks, LLC
11-06-2025, 09:22 AM
My guess is that stuff like this is going to be increasingly difficult to find. The time you spend searching high and low for the pigtail connector might be better spent finding some smaller mating connector pigtails and cutting/splicing the new connectors in......or just wire up direct without a connector. Worse case is if the stalk goes bad, you'll have to re-do those connections.....not the end of the world.

GTM-Blease
11-06-2025, 04:34 PM
My guess is that stuff like this is going to be increasingly difficult to find. The time you spend searching high and low for the pigtail

Thanks, Shane. Wiring up directly was going to be my next move. Posting here was going to be my last ditch effort to find one of these connectors.