Lizard Skin

[TXJosh]

Hello all

Has anybody applied lizard skin to the cockpit side of the firewall? I see photos of those who have done this and there are no drill holes in the firewall so I am presuming that the lizard skin can be drilled through ?

Does anybody have a confirmatory or opposite experience to the above?

Thank you.

[edwardb]

I've used Lizard Skin multiple times and like it a lot. It's a latex based product and easily drilled through. No issues there. I sometimes use stick-on products for the firewall and other hard to reach places. It's a matter of how much time you want to spend masking and then reaching into places when spraying.

[TXJosh]

I've used Lizard Skin multiple times and like it a lot. It's a latex based product and easily drilled through. No issues there. I sometimes use stick-on products for the firewall and other hard to reach places. It's a matter of how much time you want to spend masking and then reaching into places when spraying.

Meaning, you stick things on to the lizard skin covered firewall with adhesive?

[edwardb]

Meaning, you stick things on to the lizard skin covered firewall with adhesive?

Looks like I didn't explain myself very well. No, I don't do both. Either Lizard Skin or stick-on products. I was only pointing out that for hard to reach areas, like down inside the footboxes especially on the drivers side, I sometimes use stick-on products instead of Lizard Skin. No issue with spraying the firewall and calling it done if that's what you want.