Wheel Spinner hub locks

[elfrey]

Hi,

Does anybody still make the hub locks like SJDave was making?
I reached out (PM) not sure of his status.
217713

[rponfick]

Too bad if no longer available. I had a set and loved them after dealing with spinning center hub.
Ralph

[95050JohnR]

Hi Elfrey,
Unfortunately , SJDave passed away earlier this year. Don’t think anyone has continued his design.
John

[elfrey]

Hi Elfrey,
Unfortunately , SJDave passed away earlier this year. Don’t think anyone has continued his design.
John
Sorry to hear that about Dave. Thank you

[mrglaeser]

Here is another solution I'm going to try. Just some basic hardware needed.

https://thefactoryfiveforum.com/showthread.php?48886-Need-a-solution-to-secure-the-Halibrand-knock-off-hub-from-spinning

[BornWestUSA]

Sad to read this, the parts worked great for me.

https://www.forevermissed.com/david-albertalli/about

[Rian_Colorado]

I used Michael Eversons method on my Coupe, it works great, and is a relatively cheap fix

I tried to recreate Dave's rings, but the weight of the ring in the wheel upset rotational things enough that the wheel was out of balance. I suppose I could always have the wheels re-balanced after installing them, but going the M.E.'s method just made more sense.

I need to find another vendor or different part number from MMCarr though, as they don't seem to be carrying this...... 99142A630

Rian

[elfrey]

I used Michael Eversons method on my Coupe, it works great, and is a relatively cheap fix

I tried to recreate Dave's rings, but the weight of the ring in the wheel upset rotational things enough that the wheel was out of balance. I suppose I could always have the wheels re-balanced after installing them, but going the M.E.'s method just made more sense.

I need to find another vendor or different part number from MMCarr though, as they don't seem to be carrying this...... 99142A630

Rian

I am going to try Michael’s method as well, I was able to get both items from McMaster Carr