Wanted: Power Steering Rack Extenders. RECEIVED. CLOSED. [Archive]

edwardb

07-20-2025, 05:16 AM

Looking for a pair of Fox body 1" power steering rack extenders. Not looking for a handout. Happy to pay for them. Just need to confirm they're the right ones. For a Fox body power steering rack and add one inch to each side. Breeze is out of stock at the moment and I've been told the FF ones are 1-1/2" long. (Can anyone confirm?) Hoping maybe someone has some laying around. Thanks.

Higgybulin

07-20-2025, 05:46 AM

Looking for a pair of Fox body 1" power steering rack extenders. Not looking for a handout. Happy to pay for them. Just need to confirm they're the right ones. For a Fox body power steering rack and add one inch to each side. Breeze is out of stock at the moment and I've been told the FF ones are 1-1/2" long. (Can anyone confirm?) Hoping maybe someone has some laying around. Thanks.

Factory Five's are definitely 1.5"
Higgy
216562

edwardb

07-20-2025, 06:06 AM

Factory Five's are definitely 1.5"
Higgy
216562

Thanks. So consider me confused. Not hard since I know next to nothing about this subject. I have an aftermarket Fox PS rack. Measures 24-3/4" between the inner tie rod joints. I have a recently received NIB Factory Five PS rack that measures 26-3/4". Exactly 1" difference per side. Installing the Factory Five extenders would put the width 1" wider than what they are supplying. (I know, higher math there...) Is that OK? Enough to make a difference? Or should I hold out for the Breeze supplied 1" extenders?

nuhale

07-21-2025, 09:33 AM

I used FFR on both builds Paul. TBD on Coupe as still in progress but the MK4 feels fine!

Jeff Kleiner

07-21-2025, 10:07 AM

Same as Bryan; I've used FFR extenders on multiple builds which has resulted in nonexistent bump steer.

Jeff

edwardb

07-21-2025, 10:19 AM

Thanks guys. Appreciate the feedback. It's very helpful since this is new to me.

jab351w

07-21-2025, 10:49 AM

I have a set of the Breeze extenders that I didn't wind up using if you still need them. Just unwrapped one and can confirm it is 1".

edwardb

07-21-2025, 11:51 AM

I have a set of the Breeze extenders that I didn't wind up using if you still need them. Just unwrapped one and can confirm it is 1".

PM sent.

edwardb

07-26-2025, 05:36 AM

Thanks to jab351w (Jim) Breeze parts received, installed on rack, and the rack is installed. Onward!