Jeff_J.
07-15-2025, 01:24 PM
Looking for some experience here.
It wasn't high on the list but now that I'm driving the Cobra I really should check if the fuel gauge is calibrated correctly. Currently it holds full for a long time then starts to drop like a stone at 1/4 tank, it reads about 1/4 tank when I have 1 - 2 gallons in it. I'm wondering if this is just a reality to the shape of the tank and the sending unit and the calibration is correct or if it needs adjusting. I see by the speed hut site the default on the gauge is 240 ohms empty and 33 ohms full, does anyone know what the setting should be for an OEM cobra kit install?
I could try to set it manually but this is a start.
Thx!
It wasn't high on the list but now that I'm driving the Cobra I really should check if the fuel gauge is calibrated correctly. Currently it holds full for a long time then starts to drop like a stone at 1/4 tank, it reads about 1/4 tank when I have 1 - 2 gallons in it. I'm wondering if this is just a reality to the shape of the tank and the sending unit and the calibration is correct or if it needs adjusting. I see by the speed hut site the default on the gauge is 240 ohms empty and 33 ohms full, does anyone know what the setting should be for an OEM cobra kit install?
I could try to set it manually but this is a start.
Thx!