replacement pedal/ pedal extender/ thicker pedal pad for 93 or older mustang pedal

[MPersanis]

anyone know where I can get one of those? I need to extend my clutch pedal

[42Bfast]

Forte has a replacement pad with available extensions.
He is a forum vendor and usually very helpful.

[MPersanis]

thanks! Who is Forte?

[MPersanis]

got him, thanks!

[MPersanis]

Forte has a replacement pad with available extensions.
He is a forum vendor and usually very helpful.

he doesnt make one, but thanks

[i.e.427]

What are you trying to do? The Mustang pedals are easily adjusted. Pictures help as well.

Frank

[MPersanis]

after adjusting the seat, I find my gas and brake pedals are fine, but in order to push the clutch pedal all the way I need to use my toes, I thought a 1 inch "block" on the pedal would bring the pedal 1 inch closer to me. Its a 93 or older mustang pedal set up.

[CraigS]

Will this fit?
https://www.ebay.com/itm/254617176822?campid=5338967980&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc=91462&campid=5338969497&mkcid=1&toolid=10050&customid=51285a465cf11f7ce7873218eddf83db&mkrid=710-53481-19255-0&loc=91462
BTW I have had one on my 19 Stingray for 5 years and it is perfect.

[tnt_motorsports]

oh boy if someone had a 3D printer you could certainly replicate what CraigS has shown.

[Derald Rice]

I installed this very simple clutch pedal kit in my completed MK 2, and it allows
adjustment to suit individual needs.... Works great.

https://www.maximummotorsports.com/Clutch-Pedal-Height-Adjuster-1982-93-P501.aspx

[MPersanis]

Will this fit?
https://www.ebay.com/itm/254617176822?campid=5338967980&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc=91462&campid=5338969497&mkcid=1&toolid=10050&customid=51285a465cf11f7ce7873218eddf83db&mkrid=710-53481-19255-0&loc=91462
BTW I have had one on my 19 Stingray for 5 years and it is perfect.

Unfortunately no, that is for a 94 or newer, I need 93 or older

[MPersanis]

I saw this and could not figure out how to install it. How hard was it to install?

[Derald Rice]

I saw this and could not figure out how to install it. How hard was it to install?

Worst part was reaching up into a completed car, I removed both the seat and dash.

The quadrant was not touched.

The actual installation onto the pedal was easy.

There are instructions on MMs website.

[MPersanis]

I read through theinstructions a couple of times but could not picture what they were saying, thanks!