MK1 side pipe brackets

[MPersanis]

any one have a picture of how the side pipe brackets attach on an MK1? Mine look completely different than any I have seen.

[michael everson]

Are they the 3/4 tube with a 3/8 bolt welded to it? If so FFR supplied an oval rubber hanger that slipped over the bolt then was bolted to the frame under the car.
Mike

[MPersanis]

yes! THey seem to hang too low. Any clue where I can get a new rubber piece? I could use a band clamp I guess

[Derald Rice]

https://lmr.com/item/LRS-5263K/mustang-muffler-hanger-kit-86-93

[michael everson]

Any parts store carries them They are oval shaped about 3 inches long with two holes.
Mike

[Bob 5.0]

https://www.aceraceparts.com/products/3-8-id-exhaust-hanger-rod-support-for-sku-28050-black-rubber-74mm-long?variant=39720629239871&country=US&currency=USD&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&gad_source=1&gad_campaignid=17335685250&gclid=EAIaIQobChMI08Lv3tfXjQMVPivUAR3AEhFgEAQYDCAB EgKkQvD_BwE

[Presdough]

I would recommend a hose clamp around the new hanger. the rubber still insulates vibration and allows for some flex but the hanger wony stretch.

[MPersanis]

thanks!

[MPersanis]

I cant seem to get the nut off the bolt that comes off the frame? I get a socket on it, but it just spins. Anyone have a clue? I need to change the rubber!