Water pump selection

[Cobraman]

So my question is what water pump oreantion to use on Windsor motor, driver side intake or passenger side intake that best fits. I'm using this belt drive from summit https://www.summitracing.com/parts/tsn-10093bk/make/ford with a 1:1 ratio. I would think the driver side intake would be better but you know what happens when you assume 🤣. Open to any opinions or suggestions.

214556214557

[Mike.Bray]

I used this Flowkooler and it's been great. https://www.summitracing.com/parts/bra-1653

214580

214581

[Cobraman]

Thanks Mike, a visual always helps to get your mind around it.

[gbranham]

I used that same Flowkooler. Great product.

214653

[wrenchigor]

I just installed an Edelbrock Victor #8840 water pump on a clients small block. He is using a reverse flow pulley setup and has no hvac system. It's a bit more expensive but it uses pipe plug fittings for the small outlets for a cleaner look installed, instead of a capped outlet.

[johnnybgoode]

FlowKooler has a very nice billet impeller, pumps more water at low speed and less at high speed.

214656