Grill, A/C condensor and radiator install question

[CA_PI]

In order for the radiator to clear the A/C condenser I will need to use a 1" spacer as opposed to the 1/2" provided with the kit. Does anyone know if this will cause any clearance issues with the radiator and the engine or anything else?

Thanks

214172214173214174

[Guardm16]

[QUOTE=CA_PI;581830]In order for the radiator to clear the A/C condenser I will need to use a 1" spacer as opposed to the 1/2" provided with the kit. Does anyone know if this will cause any clearance issues with the radiator and the engine or anything else?

Thanks

Should not, I had to move mine around a bit to fit a fan shroud and the 33 Hot Rod hood hinge. The radiator has a few inches of space before you get in any danger of hitting the front springs.
214363
And mine is leaning back more than many so you should have room. I have to ask, It looks like your A/C fittings are on the Driver's side. Is that by design? What side will your compressor be located? I put mine together with the top of the radiator closest to me on the workbench, so everything was opposite, I had to keep spinning things in my mind to keep it right.