Which fuse to tap in a radar detector?

[Roscoe]

Here is my fuse box. I'm looking to wire in a radar detector with an Add-a-tap. Since there appears to be no spare fuse opening, I'll need to piggyback off an existing fuse. Looking for suggestions for the best one to use. I'm thinking horn as it's the least "dangerous" circuit to lose if I screw something up. Note I have heated seats (I live in Wyoming so they get used more than you'd think) so I assume those are connected to the "Heater" fuse/circuit.

Note: Yes, the picture shows an undersized fuse in the wiper slot...I've since fixed that.

214079

[Roscoe]

Disregard...upon further inspection the add-a-fuse is limited to 10A so I went with the wiper fuse.

[Dgc333]

FWIW, I didn't use the choke circuit so I wired my radar detector and a USB charge port to that position.

[rich grsc]

DON"T speed