DWC Street Airdam

[Dark Water Customs]

I am going to get a run of brackets cut at the waterjet and will have 5 DWC street airdams available for pre order for a March delivery. You can order through the web site.

Thanks,
-Chris

Here is the description:
This is my street airdam. It is made with 1/4" conveyor belt material so that it is more street friendly than a solid unit. The frame is made from 3/4" square tubing. It has 1/8" steel brackets that attach to the lower quickjack mount downtubes. These brackets allow the airdam to be mounted in a multitude of positions. The brackets and frame are powdercoated black. Includes stainless hardware.
7823

[FFRSpec72]

One note it might be helpful if you would provide an option for people to get Quick Release Ball Lock Pin (T-Handle) for a quick mount and removal option. This is a great product by the way, I use this on my challenge car and it hold up very well during the race season. At 130+ this helps hold the front-end down and is forgiving on the FIA curbing unlike the FFR aluminum airdam. So it's not only a street airdam it's also a very good track airdam. I know it's not spec legal but you can remove the conveyor belt and use the FFR airdam mounted to the DWC frame (and then it's spec legal).

[Pierre B]

I have had one of these on my MKII for a number of years now, and I absolutely love it. Its height adjustability allows me to place the bottom of the rubber airdam material level with the bottom of my 4-inch diameter chassis tubes. That way, nuzzling up to what could be a clearance problem gives me an early warning about whether there is a conflict. This is just an extra benefit beyond everything Tony mentions above. I give it 5 stars!