Door to dash interaction

[kirby]

The curve at the interior of the dash and the curve at the interior of my door do not seem to work.

I have the door adjusted so the interaction at the exterior is how I want it.

Do I just build this area up with rage gold?



212793
212794

[Higgybulin]

The curve at the interior of the dash and the curve at the interior of my door do not seem to work.

I have the door adjusted so the interaction at the exterior is how I want it.

Do I just build this area up with rage gold?



212793
212794

Fill her up!
Higgy

[michael everson]

They are all like that.
Mike

[GoDadGo]

I used the Fibertech on those areas and then smoothed them over with Rage Gold.

Evercoat Product Video
https://youtu.be/JwAErvc2tN4

Door Video 1
https://youtu.be/6UK6K2jcwTU

Bodywork Complete
https://youtu.be/po1Bb2_XDDk

3-Year Update & All Is Well
https://youtu.be/iwslgKJUaKc

Hope this helps and good luck.

[Jeff Kleiner]

Yep, they're all like that (except for the Mk5 ;)) and it takes work to make them look right.

https://thefactoryfiveforum.com/attachment.php?attachmentid=212796&d=1605481165

Jeff
212796

Jeff

[kirby]

Thanks guys. Jeff do you have a photo of from the other side and can you confirm just rage to fill?

[kirby]

GoDadGo thanks for the videos. I knew immediately you were from south LA. My wife and I lived in Boutte for a while, wish we were having crawfish for Easter and I hope you are!!!

[GoDadGo]

My car would have sucked had Jeff not shared his knowledge with me during my build.
Sir Jeffski told me to use Rage Gold on my car to smooth things out.
I added the Fibertech on my own volition.
Finally, we're not doing Crawfish this year; however, my brother's family is.