RogerRoger88
04-03-2025, 05:20 PM
I don't seem to have bolts for attaching my hubs to my rear spindles on my IRS. I figured I would reach out here before contacting FFR. Anyone know the exact measurements? Hoping I can get some ordered.
Thanks!
Jesse
edwardb
04-03-2025, 07:30 PM
Based on what I could find, those are M12 x 1.5 x 60. But are specifically high strength, flange head, Loctite pre-applied, torque-to-yield bolts. Not a hardware store item. Ford dealer should have them if you can't get them from Factory Five. The Ford Performance kit for the knuckle/hub should have had them. https://performanceparts.ford.com/part/M-5970-M
RogerRoger88
04-04-2025, 05:44 AM
Thanks for the info Edward! I'll see what I can find.
AA-ron
04-04-2025, 07:41 AM
My kit was missing them as well. I too found them at the local Ford dealer-- no biggie.