Sidepipe Hanger Details

[BRRT]

Does anyone have parts store part numbers or cross reference part numbers for the exhaust hangers and rubber spacers for mounting the sidepipe brackets? I have either misplaced them or never received them.
FYI, RemFlex makes the gaskets to fit our headers & sidepipes.

Thanks!

https://thefactoryfiveforum.com/attachment.php?attachmentid=212068&d=1743613563

[Presdough]

walker 35460 or 35119

[Jeff Kleiner]

The standoff is McMaster-Carr 9378K361

https://www.mcmaster.com/9378K361/

https://www.mcmaster.com/products/sandwich-mounts/thread-size~5-16-18/diameter~1/

Jeff

[Valkster]

My kit came with two extra standoffs. If you PM me your address, I wouldn't mind sending them to you if you haven't already ordered them. Can someone tell me the source and part number for the header/side pipe gaskets? I have had mine off-and-on too many times, and they are breaking. My O2 sensor is not liking that, lol.

-Mark

[BRRT]

The side pipe to header gasket is Remflex RFL-8023. I purchased them from Summit, about $20.

[Valkster]

I looked that gasket up and the holes are too small for me. I will use that info to source mine, though.

Thanks, I hope the 1-5/8" diameter holes work for you, mine are 1-7/8" diameter. If anyone has the part number for the gasket with the 1-7/8 holes it would be appreciated.

-Mark

[Ducky2009]

Exhaust hangers - O'Reilly #BR560-001

[Jeff Kleiner]

Breeze has gaskets for 7 bucks and the rubber hangers for $4.50. You guys need to remember to make Mark/Breeze your first stop.

Jeff

[Valkster]

Thanks, Jeff. Will do. I did not realize Breeze sold gaskets.

-Mark

[BRRT]

Breeze has gaskets for 7 bucks and the rubber hangers for $4.50. You guys need to remember to make Mark/Breeze your first stop.

Jeff

Thanks for the heads-up Jeff.