Can I get a windshield measurement?

[Blitzboy54]

I am starting to work on mounts for the drivers seat. I had planned to temporarily install the windshield (still might) but it's hard to gauge the actual height without the body. I would like to set it up so I can make sure to clear the frame for line of site. If someone would be so kind as to take a tape measure and get me the a straight line measurement from the cockpit floor to the top of the windshield frame on the drivers side. I want to make sure my eyes are going to be below it.


I really appreciate it.

Thanks

https://thefactoryfiveforum.com/attachment.php?attachmentid=211439&d=1741891921

[Jeff Kleiner]

If you measure from the top center of the windshield frame straight down to the top of the tunnel it will be approximately 26 inches.

Jeff

[Blitzboy54]

If you measure from the top center of the windshield frame straight down to the top of the tunnel it will be approximately 26 inches.

Jeff

Awesome! That will work.

Thanks Jeff!

[gbranham]

I wish Jeff knew these cars better than he does.

Greg