Ford Sale: Forte Tremec External Hydraulic Clutch Kit, Brand New, Never Used

[edwardb]

I have a Forte external hydraulic clutch kit for sale. This was mounted onto a Coyote/TKX by Forte but has never been run, fluid added, etc. Exactly like you would get if ordered directly with two exceptions: Included is a clutch arm, throw-out bearing, and pivot. These are not normally part of the kit. Not included is the Wilwood Master Cylinder. Normal size for this setup is 3/4". The pictures below are all the parts ready to ship and the engine it was installed on before I removed it.

Not there are several varieties of this kit depending on your engine and transmission. If you have a Coyote with a TKX or TKO, this will work per his website. T-5 and T-56 are listed separately. 302/351 engines are also listed separately.

New from Forte this kit is $468 plus shipping. The not included MC and included clutch arm and related are about a wash. Asking $200 plus shipping. A bargain if this works for you. U.S. addresses only please. PM your exact address and I will provide the total with shipping. Thanks.

https://thefactoryfiveforum.com/attachment.php?attachmentid=211337&d=1741624043

https://thefactoryfiveforum.com/attachment.php?attachmentid=211338&d=1741624043

https://thefactoryfiveforum.com/attachment.php?attachmentid=211339&d=1741624043

[Blitzboy54]

Man, I would have scooped up all this stuff a 2 months ago. Life is all about timing.

Good luck Paul. Really looking forward to your next adventure

[Jim1855]

Paul,
Will this kit work with a Windsor, QuickTime and TKO-600? If so, I'll take it.
I don't see why not.
I have a McLeod RST Dual Disk Clutch.
Thanks,
Jim

[edwardb]

Paul,
Will this kit work with a Windsor, QuickTime and TKO-600? If so, I'll take it.
I don't see why not.
I have a McLeod RST Dual Disk Clutch.
Thanks,
Jim

Hi Jim. I believe the parts in these kits are common to all setups except the large aluminum mounting bracket. As I understand, they are different based on the location of the bell housing mounting holes in relation to the clutch fork opening. I can't say whether this Coyote based bracket would fit your setup. Maybe yes as is or maybe with some modification(s). The world isn't beating a path to my door to buy. You're welcome to give it a try if you want and then pay what it's worth to you. It came off an engine I bought and I'd be happy if someone could get some use from it versus languishing in my extra parts storage. You want to pick it up, or? I don't get over your direction much any more since our grandson graduated from Calvin. Let me know. Thanks.

[Jim1855]

Paul,
Thank you.
PM inbound
Jim

[edwardb]

*** sold ***