PDA

View Full Version : Would you mind posting a pic of how you mounted your LS3 accelerator pedal?


SeattleDiver
03-09-2025, 05:08 PM
Hi,

I just got the engine started. Super exciting. Now I need to mount the gas pedal and it looks super tight. It also looks like I might need to cut the bottom of the pedal off for clearance.
If you have a roadster with an LS, can you post some pics of what you all did?

Thanks!!!!!
OB6
03-09-2025, 09:07 PM
Check out posts 27 and 96 of my build thread for details about how I tackled this.

Here are a few shots of the final install. I'm happy with how it turned out. It offers a lot of adjustability, and there's more clearance between the pedal and carpet than the pictures might suggest.

211319

211320

211321
SeattleDiver
03-23-2025, 03:41 PM
Check out posts 27 and 96 of my build thread for details about how I tackled this.

Here are a few shots of the final install. I'm happy with how it turned out. It offers a lot of adjustability, and there's more clearance between the pedal and carpet than the pictures might suggest.

211319

211320

211321

That looks really nice. What pedal did you use???
OB6
03-23-2025, 05:14 PM
That looks really nice. What pedal did you use???

Thanks. I used this pedal:

https://www.summitracing.com/parts/nal-10379038
Mike.Bray
03-23-2025, 05:16 PM
Thanks. I used this pedal:

https://www.summitracing.com/parts/nal-10379038

With a custom mount!
OB6
03-23-2025, 07:56 PM
With a custom mount!

Custom mount and custom pedal arm (and pedal). Lol.
BRRT
03-23-2025, 10:12 PM
Check my build thread. My mount is similar to Terry's (OB6), but did the pad and arm slightly different. BTW, the manufacturer of your ECU will likely be very specific about what pedal works with their electronics. I'm assuming you are running DBW.