jharris
03-02-2025, 11:28 AM
Hey Guys,
We had a few guys ask about wiring the Russ Thompson turn signal kit into our Infinitybox IPM1 kit. Here is a simple wiring diagram that shows you how to do it.
211032
Our system manages all the details for the turn signals and 4-ways internally. We do all the flashing so you do not need an external flasher. We can also easily toggle the high-beams so you do not need an external relay of a high-beam module to manage the button at the end of the turn signal stalk. That is all internal to our system.
The MASTERCELL also makes all the indicators on the dash really easy to wire. We have dedicated outputs for the turn signal and high beam indicators. Check out this blog post for more details on how to wire the Russ Thompson turn signal stalk kit with our Infinitybox system. (https://www.infinitybox.com/wiring/wiring-russ-thompson-turn-signal-system/)
Jay
We had a few guys ask about wiring the Russ Thompson turn signal kit into our Infinitybox IPM1 kit. Here is a simple wiring diagram that shows you how to do it.
211032
Our system manages all the details for the turn signals and 4-ways internally. We do all the flashing so you do not need an external flasher. We can also easily toggle the high-beams so you do not need an external relay of a high-beam module to manage the button at the end of the turn signal stalk. That is all internal to our system.
The MASTERCELL also makes all the indicators on the dash really easy to wire. We have dedicated outputs for the turn signal and high beam indicators. Check out this blog post for more details on how to wire the Russ Thompson turn signal stalk kit with our Infinitybox system. (https://www.infinitybox.com/wiring/wiring-russ-thompson-turn-signal-system/)
Jay