Aluminum panels

[Brandonk603]

Hi everyone, just looking for a little help on two panels that I cannot seem to figure figure out where they go. The two part numbers I have are 60700 and 6070 one. On page 49 and 50 of the manual it does not show these part numbers. Here are the two panels in question.
Thank you,
Brandon.

[Jphoenix]

Installation of those panels is shown on page 536 of the build manual.

[edwardb]

Don't remember what the manual shows. But this is where they go in the rear wheel wells.

https://thefactoryfiveforum.com/attachment.php?attachmentid=106069&d=1555791959

https://thefactoryfiveforum.com/attachment.php?attachmentid=106068&d=1555791951

[Brandonk603]

I must have a different revision as page 536 shows a selection of wheels. I did look through the manual again and no mention of these panels.
Thankyou for checking Jim!
Edward, I appreciate the pictures and not sure how I overlooked those

[Jphoenix]

I must have a different revision as page 536 shows a selection of wheels. I did look through the manual again and no mention of these panels.
Thankyou for checking Jim!
Edward, I appreciate the pictures and not sure how I overlooked those

My manual is rev. W. Do you have a later rev?