Cobraman
02-06-2025, 08:09 PM
Thought I would update on dash mounting as many of the posts have communicated that it is difficult to remove dash after body is mounted. So I researched many of the posts in the forum. So I followed that advice using rivet nuts and stainless button head screws.
Also cut some 1" angle iron and riveted them on the dash hoop. I drilled and tapped to accept 1/4 ×20 stainless screws. Also used rivets nuts on underdash supports. This seems very solid and is easy to remove. I've attached some pictures.210205210206210207210208210209
Also cut some 1" angle iron and riveted them on the dash hoop. I drilled and tapped to accept 1/4 ×20 stainless screws. Also used rivets nuts on underdash supports. This seems very solid and is easy to remove. I've attached some pictures.210205210206210207210208210209