American Flag Kits NOW available-

[magicmarto]

Both 9"x6" and 10"x15" American Flag Kits are ready to ship!!!
Mount them anywhere you want!!! Passenger Side, Driver Side, outside on the roll bar, inside on the roll bar, down low, up high....your call.
https://www.roadstertowbar.com/products/american-flag-kit

210051

210052

[Jrmotorsports55]

Just got mine. Install and review video coming soon.

[Fman]

I also just ordered one, looking forward to flying old glory on the roadster.

[SJDave]

Magicmarto...have you tried those clamps on 2", 1.75 and 1.5" rollbars. I used a similar product from China on my Bimini Tops and with the rubber inserts I ran into problems. If you have 2" they didn't work at all. Had to bore out all the teeth inside them and used some thin 3M friction tape to line them with. On the 1.75 and 1.5" clamps I had to carefully sand down the thickness of the rubber inserts to get them to work. I believe they were designed to Metric sizes and the marketing guys rounded off to say they fit SAE size too. Like your concept though!

[Jrmotorsports55]

Yeah, will be posting a video of the install on my MK2 with a powdercoated 2" bar. The mount is a little small for 2" but I'm making it work.

[Jrmotorsports55]

I installed the Marlin Enterprises flag kit on my car. If you have a 2” roll bar, you need to make some adjustments to the kit.

https://youtu.be/AmzzrmxgBus?si=vKXCp5Nz5UC6N5z0

[Fman]

I installed my flag kit, very easy to install and looks great. Everything seems well made, have not driven the car yet with it on but not expecting any problems.

https://thefactoryfiveforum.com/attachment.php?attachmentid=210385&d=1739318613

[toadster]

very cool! thanks for sharing Travis!!

[magicmarto]

you are correct, they work up to a 1.937" dia
M

[Jim Wehr]

Just ordered one. Going to try to make it fit my non-metric 2" rollbar. 'Merica!