Cobraman
02-02-2025, 10:27 PM
Need some more information on how to install Hopkins 4 flat converter. I have tested the complete system and it works perfect other than the tail lights don't work properly as a result of not having this converter installed yet. My question is how. I have found several comments and some diagrams on this fourm but they are very old and that information doesn't correspond to the wiring colors used in my wiring harness. I have ohmed each of the corresponding taillight wires verifying there location and colors for each function but there are 5 wires on one side and 4 on the other side on converter which I have figured out how 4 wires
on each side connect (via connector) but the red wire not sure? The manual nor the converter instructions give much detail Can anyone point me in the right direction.
210037
on each side connect (via connector) but the red wire not sure? The manual nor the converter instructions give much detail Can anyone point me in the right direction.
210037