Roll bar alignment question

[TTimmy]

Howdy Folks!

I just dropped my roll bar into place and the alignment is a bit off. I’m looking for guidance on the most practical way to get things aligned.

Am I ok applying a lot of leverage to the rear mounts or is cutting and welding the way I need to go. I do not have the tools or skills to cut and weld.

https://thefactoryfiveforum.com/attachment.php?attachmentid=209905&d=1738440165

https://thefactoryfiveforum.com/attachment.php?attachmentid=209906&d=1738440165

https://thefactoryfiveforum.com/attachment.php?attachmentid=209907&d=1738440165

[rich grsc]

Just bend the lower mounts using the tubing. Put some muscle into it

[Jim1855]

Any way you could put a ratcheting come-along on the two rear tubes? That might help to pull them together while watching the deflection.

A full width bar, cool! My favorite configuration.

Jim